-
Your shopping cart is empty!
MENU
The LITTLE-EX series of cable end float switches by Cynergy3 utilises a self-cleaning switching element to enable switching insensitive to humidity or condensation and hence use in widely fluctuating temperatures. These float switches are ATEX Ex II 1 G Ex ia IIC T6 certified and designed for use in hazardous areas. The switch is housed within a high density polyethylene floating body (please refer to the Chemical compatibility chart in Technical library) with centre of gravity carefully positioned near the cable entry. The LITTLE-EX series is supplied with 5m, 10m or 20m length of cable and can be operated in temperatures between -20°C and +40°C.
Typical applications for the Cynergy3 LITTLE-EX float switches include:
The below table gives the full specifications for each resistor model available including the Cynergy3 LITTLE-EX series:
£0.00 Ex Tax: £0.00
The MS series of cable end float switches by Cynergy3 utilises a microswitch element activated by a moving stainless steel ball with lifetime of 200,000 operations. The switch is hermetically sealed within a HDPE casing filled with non-hygroscopic closed-cell polyurethane, enabling it to work as much as 100m deep in water. The MS series features a selection of contact forms (n/o, n/c and c/o), direct switching power and protective earth conductor included as standard (except for c/o versions). The switching element is UL, VDE and CENELEC approved. The switches are supplied with 5m length of PVC or PUR (suitable for use in fuel oils) cable with and can be operated in temperatures between 0°C and +45°C.
Typical applications for the Cynergy3 MS series of float switches include:
The below table gives the full specifications for each resistor model available including the Cynergy3 MS series:
£0.00 Ex Tax: £0.00
The MS series of cable end float switches by Cynergy3 utilises a microswitch element activated by a moving stainless steel ball with lifetime of 200,000 operations. The switch is hermetically sealed within a HDPE casing filled with non-hygroscopic closed-cell polyurethane, enabling it to work as much as 100m deep in water. The MS series features a selection of contact forms (n/o, n/c and c/o), direct switching power and protective earth conductor included as standard (except for c/o versions). The switching element is UL, VDE and CENELEC approved. The switches are supplied with 5m length of WRAS approved cable with and can be operated in temperatures between 0°C and +45°C (WRAS approved to +23°C).
Typical applications for the Cynergy3 MS series of float switches include:
The below table gives the full specifications for each resistor model available including the Cynergy3 MS series:
£0.00 Ex Tax: £0.00
The RSF43 nylon float switches are part of the RSF40 series of compact internal fittings. It offers a number of options including choice of maximum power (25vA or 100VA) and option of flying leads or M12 connector. The switch action may be reversed by rotating the switch by 180°. The RSF43 float switches come with nitrile gasket as standard, are WRAS approved and can be operated in temperature range between -20°C and +75°C.
Typical applications for the Cynergy3 RSF40 series of float switches include:
Customisation is available on this product - speak to our technical sales team to discuss your requirement.
The below table gives the full specifications for the Cynergy3 RSF40 series including the RSF43 switches:
£0.00 Ex Tax: £0.00
The RSF44 polypropylene (PP) float switches are part of the RSF40 series of compact internal fittings. It offers a number of options including choice of maximum power (25VA or 100VA) and option of flying leads or M12 connector. The switch action may be reversed by rotating the switch by 180°. The RSF44 float switches come with nitrile gasket as standard, are WRAS and NSF approved and can be operated in temperature range between -20°C and +100°C.
Typical applications for the Cynergy3 RSF40 series of float switches include:
Customisation is available on this product - speak to our technical sales team to discuss your requirement.
The below table gives the full specifications for the Cynergy3 RSF40 series including the RSF44 switches:
£0.00 Ex Tax: £0.00
The RSF46 Polyphenylene Sulphide (PPS) float switches are part of the RSF40 series of compact internal fittings. It offers a number of options including choice of maximum power (25VA or 100VA) and option of flying leads or M12 connector. The switch action may be reversed by rotating the switch by 180°. The RSF46 float switches come with nitrile gasket as standard, are UL and NSF approved (and WRAS approved when used with Nitrile gasket) and can be operated in temperature range between -10°C and +120°C.
Typical applications for the Cynergy3 RSF40 series of float switches include:
Customisation is available on this product - speak to our technical sales team to discuss your requirement.
The below table gives the full specifications for the Cynergy3 RSF40 series including the RSF46 switches:
£0.00 Ex Tax: £0.00
The RSF47 Polyvinylidene Fluoride (PVDF) float switches are part of the RSF40 series of compact internal fittings. It offers a number of options including choice of maximum power (25VA or 100VA) and option of flying leads or M12 connector. The switch action may be reversed by rotating the switch by 180°. The RSF47 float switches come with nitrile gasket as standard, are UL and NSF approved and can be operated in temperature range between -10°C and +105°C.
Typical applications for the Cynergy3 RSF40 series of float switches include:
Customisation is available on this product - speak to our technical sales team to discuss your requirement.
The below table gives the full specifications for the Cynergy3 RSF40 series including the RSF47 switches:
£0.00 Ex Tax: £0.00
The RSF48 polypropylene (PP) float switches are part of the RSF40 series of compact internal fittings. It offers a number of options including choice of maximum power (25VA or 100VA) and option of flying leads or M12 connector. The switch action may be reversed by rotating the switch by 180°. The RSF48 float switches come with nitrile gasket as standard, are UL approved and can be operated in temperature range between -20°C and +100°C.
Typical applications for the Cynergy3 RSF40 series of float switches include:
Customisation is available on this product - speak to our technical sales team to discuss your requirement.
The below table gives the full specifications for the Cynergy3 RSF40 series including the RSF48 switches:
£0.00 Ex Tax: £0.00
The RSF53 internal fitting nylon float switches are part of the RSF50 series offering compact design and a number of options including choice of maximum power (25VA or 100VA) and mounting (1/8" mounting thread or M12 connector with nitrile gasket). The RSF53 switches can be mounted either from the bottom or from the top of the tank and therefore access to the inside of the tank is required. The switch action may be reversed by removing the float, inverting it and refitting to the stem. The RSF53 float switches are WRAS approved and can be operated in temperature range between -20°C and +75°C.
Typical applications for the Cynergy3 RSF50 series of float switches include:
Customisation is available on this product - speak to our technical sales team to discuss your requirement.
The below table gives the full specifications for the Cynergy3 RSF50 series including the RSF53 switches:
£0.00 Ex Tax: £0.00
The RSF54 internal fitting Polypropylene (PP) float switches are part of the RSF50 series offering compact design and a number of options including choice of maximum power (25VA or 100VA) and mounting (1/8" mounting thread or M12 connector with nitrile gasket). The RSF54 switches can be mounted either from the bottom or from the top of the tank and therefore access to the inside of the tank is required. The switch action may be reversed by removing the float, inverting it and refitting to the stem. The RSF54 float switches are WRAS and NSF approved and can be operated in temperature range between -20°C and +100°C.
Typical applications for the Cynergy3 RSF50 series of float switches include:
Customisation is available on this product - speak to our technical sales team to discuss your requirement.
The below table gives the full specifications for the Cynergy3 RSF50 series including the RSF54 switches:
£0.00 Ex Tax: £0.00
The RSF56 internal fitting Polyphenylene Sulphide (PPS) float switches are part of the RSF50 series offering compact design and a number of options including choice of maximum power (25VA or 100VA), mounting (1/8" mounting thread or M12 connector), viton or nitrile gaskets and ETFE or PVC leadouts. The RSF56 switches can be mounted either from the bottom or from the top of the tank and therefore access to the inside of the tank is required. The switch action may be reversed by removing the float, inverting it and refitting to the stem. The RSF56 float switches are WRAS (with PVC leadouts only), NSF and UL approved and can be operated in temperature range up to -10°C to +120°C (with ETFE leadout option).
Typical applications for the Cynergy3 RSF50 series of float switches include:
Customisation is available on this product - speak to our technical sales team to discuss your requirement.
The below table gives the full specifications for the Cynergy3 RSF50 series including the RSF56 switches:
£0.00 Ex Tax: £0.00
The RSF57 internal fitting Polyvinylidene Fluoride (PVDF) float switches are part of the RSF50 series offering compact design and a number of options including choice of maximum power (25VA or 100VA), mounting (1/8" mounting thread or M12 connector) and viton or nitrile gaskets. The RSF57 switches can be mounted either from the bottom or from the top of the tank and therefore access to the inside of the tank is required. The switch action may be reversed by removing the float, inverting it and refitting to the stem. The RSF57 float switches are NSF and UL approved and can be operated in temperature range between -10°C and +105°C.
Typical applications for the Cynergy3 RSF50 series of float switches include:
Customisation is available on this product - speak to our technical sales team to discuss your requirement.
The below table gives the full specifications for the Cynergy3 RSF50 series including the RSF57 switches:
£0.00 Ex Tax: £0.00
The RSF58 internal fitting Polypropylene (PP) float switches are part of the RSF50 series offering compact design and a number of options including choice of maximum power (25VA or 100VA) and mounting (1/8" mounting thread or M12 connector). The RSF58 switches can be mounted either from the bottom or from the top of the tank and therefore access to the inside of the tank is required. The switch action may be reversed by removing the float, inverting it and refitting to the stem. The RSF58 float switches are UL approved and can be operated in temperature range between -20°C and +100°C.
Typical applications for the Cynergy3 RSF50 series of float switches include:
Customisation is available on this product - speak to our technical sales team to discuss your requirement.
The below table gives the full specifications for the Cynergy3 RSF50 series including the RSF58 switches:
£0.00 Ex Tax: £0.00
The RSF83 external fitting nylon float switches are part of the RSF80 series offering compact design and a choice of maximum switching power (25VA or 100VA) and mounting (flying leads or M12 connector). As these switches are mounted through the tank wall via 1/2" NPT thread, access to the inside of the tank is not necessary. The switch action may be reversed by rotating the switch by 180° (make on rise - N/O or make on fall - N/C) and can be operated in temperature range between -20°C and +75°C.
Typical applications for the Cynergy3 RSF80 series of float switches include:
Customisation is available on this product - speak to our technical sales team to discuss your requirement.
The below table gives the full specifications for the Cynergy3 RSF80 series including the RSF83 switches:
£0.00 Ex Tax: £0.00
The RSF84 external fitting polypropylene (PP) float switches are part of the RSF80 series offering compact design and a choice of maximum switching power (25VA or 100VA) and mounting (flying leads or M12 connector). As these switches are mounted through the tank wall via 1/2" NPT thread, access to the inside of the tank is not necessary. The switch action may be reversed by rotating the switch by 180° (make on rise - N/O or make on fall - N/C) and can be operated in temperature range between -20°C and +100°C.
Typical applications for the Cynergy3 RSF80 series of float switches include:
Customisation is available on this product - speak to our technical sales team to discuss your requirement.
The below table gives the full specifications for the Cynergy3 RSF80 series including the RSF84 switches:
£0.00 Ex Tax: £0.00
