PCB Terminaler

PCB Terminaler

PCB terminals from the Weidmüller OMNIMATE Power range are sturdy, direct connection for extreme current and voltage requirements in all power electronics applications such as solar inverters, frequency converters, servo-controllers and power supplies.

  • High-power: 150A / 1000V (IEC) or 127A / 600V (UL)
  • Application-oriented scalability: connection cross-sections from 16mm² to 50mm²
  • Simple UL approval of the device up to 600V
  • Zero-maintenance steel clamp for screw connections that are resistant to vibration

Show:
Sort By:

Weidmüller LM 3.50/90 Series

The LM 3.50/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a clamping yoke screw connection. Designed with a conductor outlet direction of 90° and a choice from 2 up to 12 poles and a 3.5mm pitch. The LM 3.50/90 series from Weidmüller have a fully automatic assembly using wave soldering and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 12
  • Solder pin length of 3.2mm
  • Pitch of 3.5mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 3.5mm to 5mm depending on the number of poles required
  • Rated current for minimum number of poles 16A (IEC) and 10A (UL)
  • Orange in colour
  • Packaged in Boxes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LM 3.50/90 PCB terminal series:

Weidmüller LM 3.50/90_3.2SN OR BX Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LM 5.08/90 Series

The LM 5.08/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a clamping yoke screw connection. Designed with a conductor outlet direction of 90° and a choice from 2 up to 24 poles and a 5.08mm pitch. The LM 5.08/90 series from Weidmüller have a fully automatic assembly using wave soldering and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 24
  • Solder pin length of 3.5mm
  • Pitch of 5.08mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 24 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 5.08mm to 119.84mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 15A (UL)
  • Orange in colour
  • Packaged in Boxes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LM 5.08/90 PCB terminal series:

Weidmüller LM 5.08/90_3.5SN OR BX Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMD 3.50/180 Series

The LSF-SMD 3.50/180 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 12 poles and a 3.5mm pitch. The LSF-SMD 3.50/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Mounting onto PCB with reflow soldering
  • Number of poles available from 2 to 12
  • Pitch of 3.5mm
  • Conductor outlet direction of 180°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 3.5mm to 38.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tape on reel
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 3.50/180 PCB terminal series:

Weidmüller LSF-SMD 3.50/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMD 3.50/90 Series

The LSF-SMD 3.50/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 12 poles and a 3.5mm pitch. The LSF-SMD 3.50/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Mounting onto PCB with reflow soldering
  • Number of poles available from 2 to 12
  • Pitch of 3.5mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 3.5mm to 38.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tape on reel
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 3.50/90 PCB terminal series:

Weidmüller LSF-SMD 3.50/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMD 5.00/180 Series

The LSF-SMD 5.00/180 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 12 poles and a 5mm pitch. The LSF-SMD 5.00/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Mounting onto PCB with reflow soldering
  • Number of poles available from 2 to 8
  • Pitch of 5mm
  • Conductor outlet direction of 180°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 5mm to 35mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tape on reel
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 5.00/180 PCB terminal series:

Weidmüller LSF-SMD 5.00/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMD 5.00/90 Series

The LSF-SMD 5.00/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 8 poles and a 5mm pitch. The LSF-SMD 5.00/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Mounting onto PCB with reflow soldering
  • Number of poles available from 2 to 8
  • Pitch of 5mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 5mm to 35mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tape on reel
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 3.50/90 PCB terminal series:

Weidmüller LSF-SMD 5.00/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMD 7.50/180 Series

The LSF-SMD 7.50/180 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 12 poles and a 7.5mm pitch. The LSF-SMD 7.50/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Mounting onto PCB with reflow soldering
  • Number of poles available from 2 to 6
  • Pitch of 7.5mm
  • Conductor outlet direction of 180°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.5mm to 37.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tape on reel
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 7.50/180 PCB terminal series:

Weidmüller LSF-SMD 7.50/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMD 7.50/90 Series

The LSF-SMD 7.50/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 6 poles and a 7.5mm pitch. The LSF-SMD 3.50/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Mounting onto PCB with reflow soldering
  • Number of poles available from 2 to 6
  • Pitch of 7.5mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.5mm to 37.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tape on reel
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 7.50/90 PCB terminal series:

Weidmüller LSF-SMD 7.50/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 3.50/180 Series

The LSF-SMT 3.50/180 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 24 poles and a 3.5mm pitch. The LSF-SMT 3.50/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 24
  • Solder pin length of 3.5mm
  • Pitch of 3.5mm
  • Conductor outlet direction of 180°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 3.5mm to 80.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 3.50/180 PCB terminal series:

Weidmüller LSF-SMT 3.50/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 3.50/90 Series

The LSF-SMT 3.50/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 24 poles and a 3.5mm pitch. The LSF-SMT 3.50/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 24
  • Solder pin length of 3.5mm
  • Pitch of 3.5mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 3.5mm to 80.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 3.50/90 PCB terminal series:

Weidmüller LSF-SMT 3.50/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 5.00/180 Series

The LSF-SMT 5.00/180 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 8 poles and a 5mm pitch. The LSF-SMT 5.00/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 3.5mm
  • Pitch of 5mm
  • Conductor outlet direction of 180°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 5mm to 35mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 5.00/180 PCB terminal series:

Weidmüller LSF-SMT 5.00/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 5.00/90 Series

The LSF-SMT 5.00/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 8 poles and a 5mm pitch. The LSF-SMT 5.00/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 3.5mm
  • Pitch of 5.00mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 5mm to 35mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 5.00/90 PCB terminal series:

Weidmüller LSF-SMT 5.00/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 5.08/90 Series

The LSF-SMT 5.08/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 8 poles and a 5.08mm pitch. The LSF-SMT 5.08/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 3.5mm
  • Pitch of 5.08mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 5.08mm to 35.56mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 5.08/90 PCB terminal series:

Weidmüller LSF-SMT 5.08/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 7.50/180 Series

The LSF-SMT 7.50/180 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 8 poles and a 7.5mm pitch. The LSF-SMT 7.50/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 3.5mm
  • Pitch of 7.5mm
  • Conductor outlet direction of 180°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.5mm to 52.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 7.50/180 PCB terminal series:

Weidmüller LSF-SMT 7.50/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 7.50/90 Series

The LSF-SMT 7.50/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 8 poles and a 7.5mm pitch. The LSF-SMT 7.50/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 3.5mm
  • Pitch of 7.5mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.5mm to 52.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 7.50/90 PCB terminal series:

Weidmüller LSF-SMT 7.50/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00