-
Your shopping cart is empty!
MENU
For applications where non-magnetic resistors are essential, we can offer a wide selection of non-magnetic, high-ohmic chip resistors by SRT Resistor Technology. SRT's range covers various chip sizes, tolerances, TCRs, VCRs, bondable and high-temperature (up to 300°C) options. While the resistors can made to order in any value within the specified range and delivered in one of the industry's shortest lead times (usually 9-10 weeks), we stock the most popular values at our UK office for even faster quick delivery.
Can't find what you're looking for? Contact us, we can often offer customised solution to meet all your needs.
The CBW 0402 non-magnetic bondable chip resistor series from SRT Resistor Technology offers a wide resistance range from 10Ω up to 100GΩ, power rating of 0.05W and working voltage rating of 60V, all in a small 0402 package. By utilising SRT's thick film resistor technology, they are able to offer low tolerances down to ±5.0% as well as a TCR as low as ±100 ppm/°C (between 10Ω and 100MΩ). The CBW 0402 resistor series has the bottom side completely insulated and features AgPd termination for flip chip assembly (face down, for conductive epoxy assembly) or gold termination for wire bonding (US/TC face up) as well as flip chip (face down, for conductive epoxy assembly).
Orientation in tape (face-up for wire bonding, face-down for flip chip assembly) is to be specified with order. If not specified, face-up is supplied as standard.
The CBW non-magnetic resistor series is also available with an extended high temperature range version (up to +200°C). Please see the separate CBW-HT product pages for further information.
Other sizes and custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
The below table gives full specifications for each resistor model available including the CBW 0402 series:
1) TCR: in ppm/K; +25°C...+125°C; TCR below standard TCR (highest value) or value >100G: +25°C...+85°C
2) VCR: typical values, all negative, not available for all TCR values
3) Continuous operating voltage (U_, Ueff): V ≤ √(P*R) or max. working voltage (the lower value)
£0.00 Ex Tax: £0.00
The CBW 0603 non-magnetic bondable chip resistor series from SRT Resistor Technology offers a wide resistance range from 10Ω up to 100GΩ, power rating of 0.1W and working voltage rating of 150V, all in a small 0603 package. By utilising SRT's thick film resistor technology, they are able to offer low tolerances down to ±5.0% (between 10Ω and 10GΩ) as well as a TCR as low as ±50 ppm/°C (between 10Ω and 100MΩ). The CBW 0603 resistor series has the bottom side completely insulated and features AgPd termination for flip chip assembly (face-down, for conductive epoxy assembly) or gold termination for wire bonding (US/TC face up) as well as flip chip (face-down, for conductive epoxy assembly).
Orientation in tape (face-up for wire bonding, face-down for flip chip assembly) is to be specified with order. If not specified, face-up is supplied as standard.
The CBW non-magnetic resistor series is also available with an extended high temperature range version (up to +200°C). Please see the separate CBW-HT product pages for further information.
Other sizes and custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
The below table gives full specifications for each resistor model available including the CBW 0603 series:
1) TCR: in ppm/K; +25°C...+125°C; TCR below standard TCR (highest value) or value >100G: +25°C...+85°C
2) VCR: typical values, all negative, not available for all TCR values
3) Continuous operating voltage (U_, Ueff): V ≤ √(P*R) or max. working voltage (the lower value)
£0.00 Ex Tax: £0.00
The CBW 0805 non-magnetic bondable chip resistor series from SRT Resistor Technology offers a wide resistance range from 10Ω up to 1TΩ, power rating of 0.125W and working voltage rating of 200V, all in a small 0805 package. By utilising SRT's thick film resistor technology, they are able to offer low tolerances down to ±5.0% (between 10Ω and 10GΩ) as well as a TCR as low as ±50 ppm/°C (between 10Ω and 100MΩ). The CBW 0805 resistor series has the bottom side completely insulated and features AgPd termination for flip chip assembly (face-down, for conductive epoxy assembly) or gold termination for wire bonding (US/TC face up) as well as flip chip (face-down, for conductive epoxy assembly).
Orientation in tape (face-up for wire bonding, face-down for flip chip assembly) is to be specified with order. If not specified, face-up is supplied as standard.
The CBW non-magnetic resistor series is also available with an extended high temperature range version (up to +200°C). Please see the separate CBW-HT product pages for further information.
Other sizes and custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
The below table gives full specifications for each resistor model available including the CBW 0805 series:
1) TCR: in ppm/K; +25°C...+125°C; TCR below standard TCR (highest value) or value >100G: +25°C...+85°C
2) VCR: typical values, all negative, not available for all TCR values
3) Continuous operating voltage (U_, Ueff): V ≤ √(P*R) or max. working voltage (the lower value)
£0.00 Ex Tax: £0.00
The CBW 1206 non-magnetic bondable chip resistor series from SRT Resistor Technology offers a wide resistance range from 10Ω up to 1TΩ, power rating of 0.25W and working voltage rating of 400V, all in a small 1206 package. By utilising SRT's thick film resistor technology, they are able to offer low tolerances down to ±5.0% (between 10Ω and 100GΩ) as well as a TCR as low as ±50 ppm/°C (between 10Ω and 100MΩ). The CBW 1206 resistor series has the bottom side completely insulated and features AgPd termination for flip chip assembly (face-down, for conductive epoxy assembly) or gold termination for wire bonding (US/TC face up) as well as flip chip (face-down, for conductive epoxy assembly).
Orientation in tape (face-up for wire bonding, face-down for flip chip assembly) is to be specified with order. If not specified, face-up is supplied as standard.
The CBW non-magnetic resistor series is also available with an extended high temperature range version (up to +200°C). Please see the separate CBW-HT product pages for further information.
Other sizes and custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
The below table gives full specifications for each resistor model available including the CBW 1206 series:
1) TCR: in ppm/K; +25°C...+125°C; TCR below standard TCR (highest value) or value >100G: +25°C...+85°C
2) VCR: typical values, all negative, not available for all TCR values
3) Continuous operating voltage (U_, Ueff): V ≤ √(P*R) or max. working voltage (the lower value)
£0.00 Ex Tax: £0.00
The CHM 0805 high ohmic non-magnetic resistor series from SRT Resistor Technology offers a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.125W and voltage rating of 200V trimmed or 400V untrimmed (tolerances ≥5%), all in a small 0805 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±0.5% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C and a VCR as low as ±100 ppm/V (between 100kΩ and 100MΩ). The CHM 0805 resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.
The CHM high ohmic non-magnetic resistor series is also available with an extended high temperature range version (up to +300°C). Please see the separate CHM-HT product pages for further information.
Lower tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
The below table gives full specifications for each resistor model available including the CHM 0805 series:
1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available
£0.00 Ex Tax: £0.00
The CHM 0805-HT high temperature, high ohmic non-magnetic resistor series from SRT Resistor Technology offers the same features as the CHM 0805 range, while allowing for high temperature applications of up to 300°C. The main features comprise of a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.125W and voltage rating of 200V trimmed or 400V untrimmed (tolerances ≥5%), all in a small 0805 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±2% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C and a VCR as low as ±100 ppm/V (between 100kΩ and 100MΩ). The CHM 0805-HT resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.
Custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
Please see the derating curve below for the CHx-HT, CRB-HT and CBW-HT series from 0°C to +300°C:
The final measuring of the resistors takes place at room temperature (independent of TCR).
Please pay attention to the interconnection technology at high temperature applications.
Please note, the tolerance for the CHM 0805-HT series starts from ±2%, whereas the below table gives the full specifications of the standard CHM series:
1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available
£0.00 Ex Tax: £0.00
The CHM 1206 high ohmic non-magnetic resistor series from SRT Resistor Technology offers a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.25W and voltage rating of 600V trimmed or 1000V untrimmed (tolerances ≥5%), all in a small 1206 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±0.5% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C and a VCR as low as ±50 ppm/V (between 100kΩ and 100MΩ). The CHM 1206 resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.
The CHM high ohmic non-magnetic resistor series is also available with an extended high temperature range version (up to +300°C). Please see the separate CHM-HT product pages for further information.
Lower tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
The below table gives full specifications for each resistor model available including the CHM 1206 series:
1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available
£0.00 Ex Tax: £0.00
The CHM 1206-HT high temperature, high ohmic non-magnetic resistor series from SRT Resistor Technology offers the same features as the CHM 1206 range, while allowing for high temperature applications of up to 300°C. The main features comprise of a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.25W and voltage rating of 600V trimmed or 1000V untrimmed (tolerances ≥5%), all in a small 1206 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±1% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C and a VCR as low as ±50 ppm/V (between 100kΩ and 100MΩ). The CHM 1206-HT resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.
Custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
Please see the derating curve below for the CHx-HT, CRB-HT and CBW-HT series from 0°C to +300°C:
The final measuring of the resistors takes place at room temperature (independent of TCR).
Please pay attention to the interconnection technology at high temperature applications.
Please note, the tolerance for the CHM 1206-HT starts from ±1%, whereas the below table gives full specifications of the standard CHM series:
1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available
£0.00 Ex Tax: £0.00
The CHM 1210 high ohmic non-magnetic resistor series from SRT Resistor Technology offers a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.35W and voltage rating of 800V trimmed or 1200V untrimmed (tolerances ≥5%), all in a small 1210 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±0.5% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±50 ppm/V (between 100kΩ and 1GΩ). The CHM 1210 resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.
The CHM high ohmic non-magnetic resistor series is also available with an extended high temperature range version (up to +300°C). Please see the separate CHM-HT product pages for further information.
Lower tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
The below table gives full specifications for each resistor model available including the CHM 1210 series:
1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available
£0.00 Ex Tax: £0.00
The CHM 1210-HT high temperature, high ohmic non-magnetic resistor series from SRT Resistor Technology offers the same features as the CHM 1210 range, while allowing for high temperature applications of up to 300°C. The main features comprise of a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.35W and voltage rating of 800V trimmed or 1200V untrimmed (tolerances ≥5%), all in a small 1210 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±1% (between 100kΩ and 1GΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±50 ppm/V (between 100kΩ and 1GΩ). The CHM 1210-HT resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.
Custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
Please see the derating curve below for the CHx-HT, CRB-HT and CBW-HT series from 0°C to +300°C:
The final measuring of the resistors takes place at room temperature (independent of TCR).
Please pay attention to the interconnection technology at high temperature applications.
Please note, the tolerance for the CHM 1210-HT series starts from ±1%, whereas the below table gives full specifications of the standard CHM series:
1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available
£0.00 Ex Tax: £0.00
The CHM 2010 high ohmic non-magnetic resistor series from SRT Resistor Technology offers a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.5W and voltage rating of 1500V trimmed or 2000V untrimmed (tolerances ≥5%), all in a small 2010 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±0.5% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±25 ppm/V (between 100kΩ and 100MΩ). The CHM 2010 resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.
The CHM high ohmic non-magnetic resistor series is also available with an extended high temperature range version (up to +300°C). Please see the separate CHM-HT product pages for further information.
Lower tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
The below table gives full specifications for each resistor model available including the CHM 2010 series:
1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available
£0.00 Ex Tax: £0.00
The CHM 2010-HT high temperature, high ohmic non-magnetic resistor series from SRT Resistor Technology offers the same features as the CHM 2010 range, while allowing for high temperature applications of up to 300°C. The main features comprise of a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.5W and voltage rating of 1500V trimmed or 2000V untrimmed (tolerances ≥5%), all in a small 2010 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±1% (between 100kΩ and 1GΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±25 ppm/V (between 100kΩ and 100MΩ). The CHM 2010-HT resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.
Custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
Please see the derating curve below for the CHx-HT, CRB-HT and CBW-HT series from 0°C to +300°C:
The final measuring of the resistors takes place at room temperature (independent of TCR).
Please pay attention to the interconnection technology at high temperature applications.
Please note, the tolerance for the CHM 2010-HT series starts from ±1%, whereas the below table gives full specifications of the standard CHM series:
1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available
£0.00 Ex Tax: £0.00
The CHM 2512 high ohmic non-magnetic resistor series from SRT Resistor Technology offers a wide resistance range from 100kΩ up to 10TΩ, power rating of 1W and voltage rating of 2500V trimmed or 3000V untrimmed (tolerances ≥5%), all in a small 2512 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±0.5% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±10 ppm/V (between 100kΩ and 100MΩ). The CHM 2512 resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.
The CHM high ohmic non-magnetic resistor series is also available with an extended high temperature range version (up to +300°C). Please see the separate CHM-HT product pages for further information.
Lower tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
The below table gives full specifications for each resistor model available including the CHM 2512 series:
1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available
£0.00 Ex Tax: £0.00
The CHM 2512-HT high temperature, high ohmic non-magnetic resistor series from SRT Resistor Technology offers the same features as the CHM 2512 range, while allowing for high temperature applications of up to 300°C. The main features comprise of a wide resistance range from 100kΩ up to 10TΩ, power rating of 1W and voltage rating of 2500V trimmed or 3000V untrimmed (tolerances ≥5%), all in a small 2512 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±1% (between 100kΩ and 1GΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±10 ppm/V (between 100kΩ and 100MΩ). The CHM 2512-HT resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.
Custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
Please see the derating curve below for the CHx-HT, CRB-HT and CBW-HT series from 0°C to +300°C:
The final measuring of the resistors takes place at room temperature (independent of TCR).
Please pay attention to the interconnection technology at high temperature applications.
Please note, the tolerance for the CHM 2512-HT series starts from ±1%, whereas the below table gives full specifications for the standard CHM series:
1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available
£0.00 Ex Tax: £0.00
The CHM 4020 high ohmic non-magnetic resistor series from SRT Resistor Technology offers a wide resistance range from 100kΩ up to 10TΩ, power rating of 1W and voltage rating of 2500V trimmed or 3000V untrimmed (tolerances ≥5%), all in a small 2512 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±0.5% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±10 ppm/V (between 100kΩ and 100MΩ). The CHM 2512 resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.
The CHM high ohmic non-magnetic resistor series is also available with an extended high temperature range version (up to +300°C). Please see the separate CHM-HT product pages for further information.
Lower tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.
The below table gives full specifications for each resistor model available including the CHM 2512 series:
1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available
£0.00 Ex Tax: £0.00
